Generally in our industry, you can see that many handboard models have completed the effect of oil injection, and injection can not only make the product beautiful, but also generally CNC processing handboard models, after injection treatment, can work with finished products.

　　手板模型需要磨在注射之前,磨削時考慮到光滑的手,明顯的角,膠的痕跡顯然不能暴露,顏色通常需要潘通色卡號碼,通常在鍋里說,這是普遍的在整個世界,這是一個規則的顏色。定性標準。一般來說，如果一個的手模廠需要有這樣一個pant色卡控制表，以便客戶有相關的注射需求，只需要提供相應的pun色卡號碼。

　　The hand board model needs to be grinded before injection. When grinding, the smooth hand, obvious angle and glue trace cannot be exposed obviously. The color usually needs Pantone color card number. Generally speaking in the pot, this is a common color in the whole world, which is a regular color. Qualitative criteria. Generally speaking, if a professional hand mold factory needs to have such a pant color card control table, so that customers have related injection needs, only need to provide the corresponding pun color card number.

　　但是有些材料很難上色，比如POM(俗稱鋼材)、PP材料，它不能，染色后不太牢固，就會被磨掉。所以基本上西貢材料或PP材料是不上色的，通過CNC加工，只需要自然的顏色研磨。

　　But some materials are difficult to color, such as POM (commonly known as steel), PP material, it can't, after dyeing is not too solid, it will be worn off. So basically Saigon materials or PP materials are not colored. Through CNC processing, only natural color grinding is needed.

　　如果是做手板模型的外觀，對產品外觀的要求比較高，但是因為加工中使用的材料只有一種顏色。如果需要彩色效果，則需要使用后期注射來達到產品的質量。

　　If it is to make the appearance of the handboard model, the requirements for the product appearance are relatively high, but because the materials used in the processing only have one color. If color effects are required, late injection is required to achieve product quality.

　　本文由http://m.taodaodan.com發布

　　This article is published by http://m.taodaodan.com